The VORTEXPROM CMD35 installation is designed to implement the patented technology of "cold" stream mixing of lubricating oils at large blending enterprises with a volume of tanks (reactors) from 5 m 3 and more.
CMD stands for Cold Mix Device. The catalyst for the mixing process in the classical production of commercial lubricating oils is an increase in temperature. In the working area of the VORTEXPROM CMD35 reactor, other processes occur that are a catalyst for the mixing reaction. The main ones are: hydrodynamic cavitation, intensive grinding and mixing in the stram (in which the contact area of the components to be mixed with base oils increases instantly), acoustic cavitation, the creation of high local pressure on the material, local temperature increase when cavitation bubbles collapse, electromagnetic processing.
The process of streaming mixing takes place in a closed-type system. This process is eco-friendly for both humans and the environment.
The installation consists of a flow-type reactor unit, a reactor control and cooling system unit The installation of VORTEXPROM CMD35 model with a throughput of up to 35 m3/hour, is recommended for use in production tanks (reactors) with a volume of 5 m3. and more. For smaller tanks, the VORTEXPROM CMD5 installation model with a capacity of 5 m3/hour is offered.
Throughput capacity 20-35 m3/hour m3/hour (depends on the characteristics of the material, viscosity, density, etc.)
AC power supply:
— Frequency, 50-60 Hz;
— Voltage, 380+-20 V;
— Maximum power, 25 kW/hour;
— Average power, 20 kW/hour;
— Output voltage to the reactor, 380+-20 V;
— Average current to the reactor, 180 A.
—The main advantage is a reduction in the production cycle time by at least two times, and a most — by ten times, since the production cycle in manufacturing depends not only on the mixing time, but also on the time of filling the container with the components. Therefore, the reduction of the production cycle time leads to the fact that the overall efficiency of the enterprise increases without building extra structures and without buying expensive heated tanks, pump equipment and strapping to them.
—The second advantage is the energy efficiency and environmental friendliness of the mixing process. Let's compare it with classic blending, in which it is necessary to maintain the temperature for mixing components from 60 to 80 degrees C for 6-12 hours. To heat 1 m3 of oil from 15 to 65 degrees C, about 20 kW / hour of electricity is needed and then it is necessary to maintain this temperature for a long time. On average, 40 kW/hour of electricity is consumed per 1 m3 of the finished product (when heated by electric heating elements). Blending companies are trying to save energy resources, and they have to heat the tanks with gas or steam, but this is not always possible, and the savings are about 30-60%. When streaming "cold" blending, it is necessary to heat the mixed composition to the minimum input temperature of the components, which is indicated by the manufacturer of these components. Most often, this temperature does not exceed 40 degrees C. To heat 1 m3 of oil from 15 to 40 degrees C, about 9 kW/hour of electricity is needed. Next, it is necessary to pass the entire composition through the working area of the reactor of the VORTEXPROM CMD35 installation on a closed cycle. If we take the minimum capacity of 20 m3/hour and the average consumption of the installation of 20 kW/hour, then for 1 m3 of the mixed composition, we will consume no more than 1 kW/hour of electricity. The energy savings are at least 75% if the heating was carried out by electric heating elements.
— The installation is easy to maintain and operate, for the working staff it is only needed to press 2 buttons "start" and "stop", or the installation can be controlled from external automatic equipment.
— The low price of the equipment in compare with its utility at the enterprise will pleasantly surprise businessmen. After all, the company will have only benefits from saving on energy resources.
In 2020, as part of the implementation of the RFBR scientific project No. 18-38-00275 at the Research Institute of Chemistry of the National Research University, tests were conducted on the pretreatment of the organic fraction of MSW (OF-MSW) in an experimental cold mixing plant produced by VORTEXPROM RUS LLC for subsequent fermentation by solid-phase anaerobic fermentation to produce biogas. Pretreatment in CMD5 allowed increasing the methane yield by 15.8%.
The obtained results showed the prospects of using CMD5 to increase the efficiency of anaerobic digestion with biogas production.
Head of the Laboratory of resource-saving Biotechnologies, Ph.D. I.Katraeva.
Director of the PTI, Doctor of Chemical Sciences, Professor A.Gorokhovsky The Institute of Physics and Technology of the Saratov State Technical University named after Gagarin Yu. A. informs that we have purchased a laboratory cold mixing unit manufactured by VORTEXPROM RUS LLC. With its help, experiments on the homogenization of lubricating compositions of various compositions were carried out in 2020.
The results of the experiments have shown the high efficiency of this equipment, which makes it possible to consider devices manufactured by VORTEXPROM RUS LLC as promising technological devices for industrial use in the manufacture of lubricants.
Alexander Gorokhovsky, Director of the Institute of Physics and Technology, Head of the Department "Chemistry and Chemical Technology of Materials" of Saratov State Technical University, Doctor of Chemical Sciences, Professor
Within the framework of the RFBR grant "Development of the basics of the process of two-stage anaerobic processing of liquid organic waste and purification of highly concentrated wastewater to produce products with high added value in the form of hydrogen and methane-containing biogas", we purchased a cold mixing plant manufactured by VORTEXPROM RUS LLC.
This made it possible to study the efficiency of processing bioreactor substrates in a vortex layer of ferromagnetic particles. The treatment of bioreactor substrates in CMD5 provides an increase in the yield of methane-containing biogas.
VORTEXPROM CMD5 is reliable in working and easy to operate.
Head of the Laboratory of Bioenergetic and Supercritical Technologies of the FSBI FNAC VIM, Candidate of Technical Sciences D. Kovalev.
As part of the execution of the Federal Target Program "Research and Development in priority areas of development of the scientific and technological complex of Russia for 2014-2020" Laboratory of Polymer Materials of the Research Institute of Chemistry of the Lobachevsky UNN, together with VORTEXPROM RUS LLC, developed, manufactured and used an improved design of a cold mixing plant in conducting research.
This made it possible to conduct research on the efficiency of processing various materials in a vortex layer of ferromagnetic particles to obtain results that meet the requirements of PNIER on the topic «Modification of chemical raw materials using vortex reactors for energy and resource conservation in the production of import-substituting products.»
E. Zakharychev, the Head of the Research Laboratory of Polymer Materials of the Research Institute of Chemistry of Lobachevsky UNN.
The Scientific and Technical Center "AhmadullinS: Science and Technology" acquired a cold mixing unit VORTEXPROM CMD5 manufactured by VORTEXPROM RUS LLC.
The Scientific and Technical Center "AhmadullinS: Science and Technology" acquired a cold mixing unit CMD5 manufactured by VORTEXPROM RUS LLC. Experiments related to the processing of hydrocarbons have been carried out with its use, and positive results have been obtained. A pilot industrial run has been implemented to clean oil from contamination with organochlorine compounds at an enterprise of the Republic of Kazakhstan.
The VORTEXPROM CMD5 is reliable in working and easy to operate.
As part of the research work of various directions, cold mixing plants produced by VORTEXPROM RUS LLC were used with a positive effect.
In the course of the research, experimental data were obtained that allow us to assert the effectiveness of the use of vortex layer apparatuses, which are of great scientific and applied importance. The research results make it possible to implement new effective technological processes in the field of applied chemical technologies, which open up opportunities for obtaining new products, upgrading existing technologies taking into account the vector of economic development.
Devices manufactured by VORTEXPROM RUS LLC are characterized by ease of operation, reliability and versatility of application in various fields. The production potential and competence of employees allows us to implement individual and non-standard solutions.
Kazan National Research Technological University, Head of the Department of Polymer and Composite Materials Processing Technology, Doctor of Technical Sciences, Professor Deberdeev Т. R.
Head of the Department of General Chemical Technology, Doctor of Chemical Sciences, Professor, Honored Scientist of the Russian Federation Kharlampidi H. E.
VORTEXPROM in social networks:
Website development — Formograph Studio
